Cleaning a THC cartridge and battery that has leaked can be a bit tricky due to the stickiness of the oil. Here are some steps you can follow to clean it off:
Safety Precautions: Ensure that the battery is disconnected and remove any other components to avoid damaging them during the cleaning process.
Wipe off Excess Oil: Use a clean, dry cloth or paper towel to gently wipe off as much of the excess oil as possible. Be careful not to spread it further or push it deeper into the device.
Isopropyl Alcohol Solution: Prepare a solution of isopropyl alcohol (also known as rubbing alcohol) and water. Use a 70% isopropyl alcohol solution, as it is effective in breaking down the sticky residue.
Dampen a Cloth: Moisten a clean cloth or cotton swab with the isopropyl alcohol solution. Ensure that it is damp, not dripping wet, as you don't want any liquid to seep into the battery or other electrical components.
Gently Clean the Surface: Carefully wipe the affected areas of the cartridge and battery with the damp cloth or swab. Apply gentle pressure and continue wiping until the sticky residue is removed. You may need to repeat this process a few times, depending on the severity of the residue.
Dry Thoroughly: After cleaning, allow the cartridge and battery to air dry completely before reassembling and reconnecting the battery. Ensure there is no residual moisture that could damage the device.
Remember to exercise caution while handling isopropyl alcohol, as it is flammable. Perform the cleaning process in a well-ventilated area and away from any open flames or sparks.
If you're unsure or uncomfortable cleaning the THC cartridge and battery yourself, it's recommended to seek assistance from a professional or the manufacturer for proper cleaning or potential replacement of the affected parts.