If your Amana washing machine only leaks during large cycles, there could be several potential reasons for this issue. Some of the common causes include:
Overloading: Large cycles usually accommodate more laundry, and if the machine is overloaded, it can cause excess water to splash out during the wash cycle. Make sure you are not exceeding the recommended load capacity of your washing machine.
Unbalanced load: An unbalanced load can cause the washing machine to vibrate excessively during the spin cycle, leading to water splashing out. Ensure that the clothes are evenly distributed inside the drum to maintain balance during the wash.
Damaged door seal/gasket: The rubber door seal or gasket around the washing machine door can get worn out or damaged over time. If this happens, it can result in leaks, particularly during large cycles when the water pressure is higher.
Clogged or damaged drain pump: If the drain pump is clogged or damaged, it may not be able to remove all the water from the drum, leading to leaks during large cycles.
Faulty water inlet valve: The water inlet valve allows water to enter the washing machine. If it is not functioning properly, it may cause overfilling and result in leaks.
Loose or damaged hose connections: Check all the hose connections leading to and from the washing machine. Loose or damaged connections can cause leaks during the wash cycle.
Cracked or damaged drum: If the washing machine's drum has cracks or damage, it may leak water during the wash cycle, especially when it's filled to a higher capacity.
To troubleshoot the issue, you can follow these steps:
- Check the load size and make sure you are not overloading the machine.
- Ensure the load is balanced inside the drum.
- Inspect the door seal for any visible signs of damage or wear.
- Clean the drain pump and check for any obstructions.
- Inspect hose connections for leaks or damage.
- If you can't identify the problem or if the machine is still under warranty, consider contacting Amana customer support or a professional appliance repair service to diagnose and fix the issue.
Remember, always disconnect the washing machine from the power supply and water sources before attempting any inspection or repair. Safety should always be a priority when dealing with electrical appliances.