If your front-loading washing machine is bouncing around while spinning, it can be a cause for concern as it may lead to damage or malfunction. Here are some steps you can take to stop the washing machine from bouncing:
Level the machine: Ensure that the washing machine is properly leveled. Use a bubble level to check both side-to-side and front-to-back. Adjust the leveling feet at the bottom of the machine until it is stable and balanced on all sides.
Check the floor: Place the washing machine on a sturdy and even surface. Avoid placing it on a carpet or an uneven floor, as this can contribute to the bouncing. If the floor is uneven, you can use a piece of plywood or a vibration-absorbing mat under the machine to provide better stability.
Distribute the load evenly: An unbalanced load can cause the machine to bounce during the spin cycle. Make sure to distribute the clothes evenly inside the drum. If you are washing a large item, try to balance it with some smaller items on the other side of the drum.
Use the right cycle: Some washing machines have different spin speed settings. If your machine allows it, choose a lower spin speed for heavier or unbalanced loads. This can help reduce the chances of bouncing.
Check the shock absorbers: Front-loading washing machines usually have shock absorbers or suspension rods that dampen vibrations during the spin cycle. Over time, these parts may wear out or become damaged. Inspect them for any signs of wear and tear, and replace them if necessary.
Inspect the drum and tub: If the washing machine has been vibrating excessively for a while, it could cause damage to the drum or tub, leading to even more vibration. Check for any cracks, dents, or misalignments, and address any issues found.
Avoid overloading: Do not overload the washing machine with clothes beyond its capacity. Refer to the manufacturer's guidelines for the maximum load capacity of your machine, and stick to it.
Perform regular maintenance: Keeping the washing machine clean and well-maintained can prevent issues that may lead to bouncing. Clean the detergent dispenser, door gasket, and filters regularly as per the manufacturer's recommendations.
If you have followed these steps and the bouncing persists, it may be a sign of an underlying mechanical issue with the machine. In such cases, it is best to contact a professional appliance repair technician to diagnose and fix the problem.