If the drain button on your LG front load washer is not working, there are alternative methods to empty the washer. Here's what you can try:
Manually drain water using a hose: Most front load washers have a small access panel near the bottom of the machine. Behind this panel, there is usually a drain hose and a filter. You can manually drain the water by following these steps:
- Unplug the washer from the power source for safety.
- Open the access panel and locate the drain hose and filter.
- Place a shallow container or a low-profile bowl beneath the hose to catch the water.
- Loosen the clamp securing the drain hose and carefully lower it into the container to allow the water to drain out.
Check the filter: Sometimes, the washer may not drain properly due to a clogged filter. Locate the filter behind the access panel mentioned above and clean it if it's clogged with debris or lint. Cleaning the filter can help improve drainage.
Tilt the washer: If the above methods don't work, you can try tilting the washer slightly forward to allow the water to flow towards the front. Place a towel under the front of the washer to catch any water that comes out.
Use a wet-dry vacuum: If you have a wet-dry vacuum, you can use it to remove the water from the drum. Carefully insert the vacuum hose into the drum and extract the water.
Contact customer support: If none of the above methods work, it's best to reach out to LG customer support or a qualified appliance repair technician for further assistance. There might be an issue with the drain pump or other components that require professional inspection and repair.
Please remember to unplug the washer from the power source before attempting any troubleshooting or repairs to ensure your safety. If you are not confident in your ability to troubleshoot or repair the washer, it's best to seek help from a professional.