Question

Are you supposed to turn on the tap connected to the washing machine every time you use it?

Answer 1

Yes, you typically need to turn on the tap connected to the washing machine every time you use it. Washing machines require a water supply to fill the drum with water for the washing process. When you start a wash cycle, the machine will automatically draw water from the connected water supply through the hose and into the washing machine's drum.

Here's a step-by-step process for using a washing machine:

1. Prepare the laundry: Sort your clothes and load them into the washing machine. Make sure not to overload the machine, as this can affect its performance and cleaning efficiency.

2. Add detergent: Put the appropriate amount of laundry detergent or washing powder into the detergent dispenser or directly into the drum, depending on the model of your washing machine.

3. Select the wash cycle: Choose the desired wash cycle based on the type of clothes and their level of soiling. Most washing machines have various wash programs for different fabrics and purposes.

4. Start the machine: Once everything is ready, close the door of the washing machine securely and press the start button to begin the wash cycle.

5. Water supply: During the wash cycle, the machine will automatically open the water inlet valve and draw water from the connected tap/hose to fill the drum.

6. Washing process: The washing machine will agitate, spin, and rinse the clothes as per the selected wash cycle.

7. Drainage: After the wash cycle is complete, the washing machine will typically drain the used water through another hose into a designated drain or plumbing system.

8. Completion: Once the machine finishes the entire cycle, it will stop, and you can retrieve your clean clothes.

Remember to turn off the tap after using the washing machine to conserve water and prevent any accidental water leakage when the machine is not in use.

Some advanced washing machines may have additional features like automatic water sensing, which can adjust the water level based on the load size, but in most cases, you'll need to ensure the tap is turned on to allow water to flow into the machine during the wash cycle.