If you have a leak in your washing machine hose that is not at the connection but inside the hose, you may need to follow these steps to identify and fix the issue:
1. Turn off the water supply: Before you start working on the hose, turn off the water supply to the washing machine. This will prevent any further water leakage while you inspect and fix the problem.
2. Disconnect the hose: Unplug the washing machine from the power source. Next, disconnect the hose from both the washing machine's water inlet and the water supply valve. Refer to your washing machine's manual for guidance on how to safely disconnect the hose.
3. Inspect the hose: Once the hose is removed, thoroughly inspect it for any visible signs of damage. Check for cracks, tears, or any worn-out areas. Pay close attention to the bends and curves of the hose, as these areas are more prone to damage.
4. Flexibility check: Gently flex the hose along its length. If you notice any stiffness or resistance in certain areas, it could indicate a blockage or weak spot that might be causing the leak.
5. Run water through the hose: Take the hose outside or to a sink and run water through it to check for leaks. If there's no visible leak, try applying some pressure along the hose to see if water starts seeping out from any weak points.
6. Patching or replacing the hose: If you identify a specific area that is causing the leak, you have a couple of options:
a. Patch small leaks: If the leak is small and you find it early, you may be able to use a hose repair kit to patch the damaged area. Follow the instructions provided with the repair kit to ensure a proper fix.
b. Replace the hose: If the hose is significantly damaged or the leak cannot be easily patched, it's best to replace the hose with a new one. You can find replacement hoses at hardware stores or appliance parts retailers.
7. Reconnect the hose: Once you have repaired the damaged hose or replaced it with a new one, reconnect it securely to both the washing machine's water inlet and the water supply valve.
8. Test for leaks: Turn on the water supply and check for any leaks. Run a short wash cycle to ensure there are no water leaks during the machine's operation.
If you're unsure about how to proceed or the issue persists despite your efforts, it's a good idea to seek assistance from a professional appliance technician. They can inspect the washing machine, diagnose the problem accurately, and perform the necessary repairs to ensure the hose functions properly and doesn't leak.