Cleaning a Dyson Cinetic Big Ball canister is a straightforward process. Here's a step-by-step guide to help you clean it effectively:
Note: Before cleaning the canister, ensure that your Dyson vacuum is disconnected from the power source and that the vacuum's bin is empty.
Empty the Canister:
- Press the bin release button located on the top of the canister handle to detach the canister from the vacuum cleaner.
- Hold the canister over a trash bin and press the red bin emptying button to release the dirt and debris into the trash.
Remove and Clean the Shroud:
- The shroud is the cylindrical part inside the canister. Hold the canister over a trash bin and pull the shroud out using the red shroud release tab located on the top of the canister.
- Tap the shroud gently to remove any dust and debris trapped inside. You can also use a soft brush or cloth to wipe away any stubborn dirt.
Clean the Canister Exterior:
- Wipe the exterior of the canister using a damp cloth to remove any dust or grime.
Wash the Canister and Shroud:
- Fill a sink or basin with warm water and a small amount of mild detergent.
- Submerge the canister and shroud in the water, making sure not to get water into the air intake holes or electrical components.
- Gently agitate the water to dislodge any dirt or debris. You can also use a soft brush to clean the shroud thoroughly.
- Rinse the canister and shroud with clean water until all soap residue is removed.
Allow to Dry:
- Shake off any excess water and let the canister and shroud air dry completely. Ensure they are thoroughly dry before reassembling.
Reassemble the Canister:
- Once the canister and shroud are dry, reinsert the shroud into the canister, making sure it clicks into place.
- Reattach the canister to the vacuum cleaner by aligning it with the ball joint and pushing it firmly until it clicks into position.
Clean the Filters:
- While cleaning the canister, it's a good idea to check and clean the vacuum's filters as well. Follow the manufacturer's instructions for removing and cleaning the filters. For Dyson Cinetic vacuums, the filters are usually washable and need to be thoroughly dry before reinstallation.
Check for Blockages:
- Before using the vacuum again, check for any blockages in the hose, wand, or floor tool. Clear any obstructions to ensure optimal performance.
Following these steps will help you maintain your Dyson Cinetic Big Ball canister and ensure its continued performance. Remember to refer to the user manual for your specific model to ensure you are cleaning it properly.