If your gas burner's spark ignition system is not working, you can safely light the burner manually using a long-reach lighter or a long matchstick. Here's a step-by-step guide on how to do it:
Turn off the gas: Before attempting to light the burner, ensure that the gas knob for the particular burner you want to ignite is in the "OFF" position.
Prepare your tools: Grab a long-reach lighter or a long matchstick. Make sure it's an extended version to keep your hand at a safe distance from the flame.
Access the burner: Lift the stovetop or remove any burner covers if necessary to access the burner you want to light. Be gentle when lifting the stovetop, as some models may have delicate components underneath.
Locate the ignition area: Look for the area where the spark usually occurs when the burner is working correctly. This is usually located near the burner head, and you might see a small metal or ceramic piece with a gap.
Turn on the gas: Turn the gas knob for the burner you want to ignite to the "LOW" position. This will allow a small amount of gas to flow out.
Light the burner: Position the long-reach lighter or matchstick near the ignition area (the small gap you located earlier). Press the lighter's trigger or ignite the matchstick and hold it close to the gap.
Adjust the flame: Once the gas ignites, adjust the gas knob to your desired flame level, such as "MEDIUM" or "HIGH," depending on your cooking needs.
Monitor the burner: Keep an eye on the burner to ensure it remains lit. If the flame goes out, turn off the gas, wait a few seconds for any accumulated gas to dissipate, and try lighting it again.
Shut off the gas: After you're done cooking, turn off the gas for the burner by setting the knob to the "OFF" position.
Put everything back: If you lifted the stovetop or removed any burner covers, make sure to put them back into place securely.
It's important to note that if your gas stove's ignition system is consistently not working, you should have it checked and repaired by a professional technician to ensure your safety and prevent potential gas leaks. Using a manual ignition method should only be a temporary solution until the system is fixed.