Replacing a stove element involves a relatively simple process. Stove elements can become worn out or faulty over time, and replacing them can help ensure your stove continues to function efficiently. Here's a general step-by-step guide to replacing a stove element:
Note: Before proceeding with the replacement, make sure to disconnect the stove from its power source to avoid any risk of electric shock.
Identify the Faulty Element: Determine which stove element needs replacement. Turn on each burner one by one and check if they are heating up properly. If one element is not heating or functioning as expected, it's likely the one that needs replacement.
Buy the Right Replacement Element: Visit an appliance store or check online to purchase the appropriate replacement element for your stove. Make sure to get the correct size and type that matches the faulty one.
Ensure Safety: As a safety precaution, turn off the stove and unplug it from the electrical outlet.
Access the Element: Lift the burner cover or coil cover to access the element. The method to access the element may vary depending on the type and model of your stove. Some electric stoves have removable coil elements, while others have smooth glass-ceramic surfaces with built-in elements.
Remove the Faulty Element:
- For Removable Coil Elements: Gently pull the coil element from its socket. If it's not coming off easily, you may need to lift and tilt it slightly to release the plug from the socket.
- For Built-In Elements: Unscrew any mounting screws or clips holding the element in place. Carefully lift the element away from the surface.
Insert the New Element:
- For Removable Coil Elements: Align the new coil element with the plug socket and gently push it in until it sits securely in place.
- For Built-In Elements: Position the new element in the correct orientation and secure it with any mounting screws or clips.
Reassemble and Test:
- For Removable Coil Elements: Place the coil cover back on top of the element.
- For Built-In Elements: Lower the element back into its position on the stove surface.
Plug In and Test: Plug the stove back into the electrical outlet and turn it on. Test the newly installed element to ensure it heats up properly.
Repeat if Necessary: If you need to replace more than one faulty element, repeat the above steps for each one.
Always refer to your stove's user manual for specific instructions on element replacement, as the process may vary based on the stove's make and model. If you are unsure about replacing the element yourself, it's best to seek assistance from a professional appliance technician.