Leveling a refrigerator is important to ensure its proper functioning and to prevent any potential damage. Here's how you can level a new refrigerator without moving it from where it is sitting:
Check the level: Start by checking the current level of the refrigerator. Place a carpenter's level on top of the refrigerator from side to side and front to back. Take note of the bubble's position in the level to determine which areas need adjustment.
Adjust the front feet: Most refrigerators come with adjustable front feet. These are typically threaded, allowing you to raise or lower them. Use a wrench or pliers to turn the front feet clockwise to raise the refrigerator and counterclockwise to lower it. Make small adjustments, and recheck the level after each turn until it is balanced both side to side and front to back.
Use shims: If the front feet are already at their maximum adjustment and the refrigerator is still not level, you can use shims to fill the gap between the floor and the refrigerator's feet. Shims are thin pieces of material that can be slid underneath the feet to raise one side of the refrigerator slightly.
Check side-to-side leveling: To ensure side-to-side leveling, place the level on one side of the refrigerator and adjust the shims or feet until it's level. Then, move the level to the other side and repeat the process.
Test the door: After leveling the refrigerator, check the door alignment. If the doors swing shut on their own, you have successfully leveled the refrigerator.
Recheck periodically: It's a good idea to recheck the refrigerator's level periodically, especially if you notice any changes in its performance or if you move the fridge to a different location.
By following these steps, you should be able to level your new refrigerator without the need to move it from its current position. Proper leveling will not only help the refrigerator work efficiently but also prevent any potential issues with the door seal and other components.