If the magnetic seal on your fridge door is too strong, making it difficult to open, you can try a few methods to reduce the strength of the magnet. Here are some steps you can follow:
Heat the seal: Using a hairdryer or a heat gun, gently warm the magnetic seal. The heat can soften the material and slightly reduce its magnetic strength. Be careful not to overheat or damage the seal; just apply gentle warmth.
Use a lubricant: Apply a small amount of silicone spray or vegetable oil to the magnetic seal. This can create a lubricating effect, making it easier to slide the seal and open the door. Be sure to wipe off any excess lubricant to avoid attracting dirt or dust.
Adjust the position of the seal: Check if the magnetic seal is properly aligned with the fridge door frame. If it is misaligned or too tight against the frame, adjusting its position may help reduce the strength of the seal.
Replace the seal: If the above methods don't work, you may consider replacing the magnetic seal with a slightly weaker one. Contact the manufacturer or check with an appliance store to find a suitable replacement.
DIY solution: If you can't find a weaker replacement seal, you can try creating a DIY solution by covering the existing seal with a layer of adhesive weatherstripping tape or foam tape. This can provide some cushioning and reduce the strength of the magnetic seal.
Keep in mind that while reducing the magnetic strength can make it easier to open the fridge door, you should ensure that the seal still maintains a proper and secure closure when the door is shut. An excessively weakened seal could lead to issues with temperature regulation and energy efficiency.
If your fridge is still under warranty, it's best to check with the manufacturer or an authorized service center before attempting any modifications. They might be able to provide guidance or assistance with the issue.