If the middle burner spark on your gas stove's electric oven is continuously clicking and making noise even when the oven is switched on, it indicates a potential issue with the ignition system. Here are a few possible reasons for the problem:
Dirty Igniter: The clicking sound is usually caused by the spark igniter trying to ignite the gas. If the igniter is dirty or has residue on it, it may not produce a consistent spark, leading to the continuous clicking. The igniter could be obstructed by food debris, grease, or other contaminants.
Wet Igniter: If the igniter or the surrounding area gets wet, it can disrupt the ignition process and cause the continuous clicking. This can occur if water spills or splashes onto the igniter or if it is not drying properly.
Misaligned Igniter: The igniter needs to be properly aligned with the burner to ignite the gas. If the igniter is misaligned or too far away from the burner, it may not create a strong enough spark, resulting in constant clicking.
Ignition Switch Issue: There might be a problem with the ignition switch itself. If the switch is malfunctioning, it can send a continuous signal to the igniter, causing it to click persistently.
To troubleshoot the issue, you can try the following steps:
Ensure the oven and gas stove are turned off and disconnected from the power source for safety purposes.
Clean the igniter and the area around it using a soft brush or cloth. Be gentle to avoid damaging the igniter.
Make sure the igniter is properly aligned with the burner. Adjust it if necessary.
Check for any signs of water or moisture around the igniter. If present, allow it to dry completely before attempting to use the oven again.
If the problem persists after cleaning and drying, it's advisable to contact a professional appliance repair technician to diagnose and fix the issue. They will have the necessary expertise and tools to identify the root cause and carry out any necessary repairs or part replacements.
Remember, when dealing with gas appliances, it's important to prioritize safety. If you're unsure or uncomfortable with troubleshooting the issue yourself, it's best to seek professional assistance to avoid any potential hazards.