Washing a blazer that is labeled as "hand wash only, no tumble dry, and do not soak" requires a bit of extra care to avoid damaging the fabric. Polyester is a durable material, but it can still be sensitive to certain washing methods. Here's a step-by-step guide on how to hand wash your polyester blazer:
What you'll need:
- Mild detergent or soap suitable for handwashing delicate fabrics.
- Clean sink or basin.
- Cold water.
- Towels for drying.
Instructions:
Preparation: Fill your sink or basin with cold water. Make sure it's enough to submerge the blazer comfortably without crowding it.
Detergent: Add a small amount of mild detergent or soap suitable for handwashing delicate fabrics to the water. Be cautious not to use too much detergent, as excess soap can be difficult to rinse out and may damage the fabric.
Spot Clean (if necessary): Before immersing the entire blazer in water, check for any specific stains or spots. If there are any, gently spot clean them using a soft cloth and the soapy water. Avoid scrubbing too hard to prevent damaging the fabric.
Hand Wash: Submerge the blazer in the soapy water and gently agitate it to ensure the detergent is evenly distributed. Gently rub the fabric together in areas that need extra cleaning. Avoid excessive rubbing, twisting, or stretching, as polyester can lose its shape easily.
Rinse: Drain the soapy water and refill the sink or basin with clean, cold water. Swirl the blazer around to rinse off any soap residue thoroughly.
Drain and Repeat (if necessary): If you notice that there is still soap remaining, repeat the rinsing process until the water runs clear.
Pressing (not wringing): Never wring or twist the blazer to remove excess water, as this can damage the fabric and cause wrinkles. Instead, gently press the water out of the blazer using your hands.
Drying: Lay a clean towel on a flat surface and place the blazer on top. Roll the towel and blazer together to absorb excess water from the garment. Unroll the towel and reshape the blazer if needed.
Air Dry: Lay the blazer on a flat, clean surface in its original shape and let it air dry. Avoid hanging it as this can cause the blazer to stretch or lose its shape.
Final Touch: Once the blazer is mostly dry, you can smooth out any wrinkles with your hands or use a cool iron on the polyester setting if necessary. Be sure to check the care label to confirm that ironing is safe for your specific blazer.
Remember to always follow the care instructions on the blazer's label, as it may have specific requirements that differ from general guidelines. With proper care, your polyester blazer should maintain its shape and look great for a long time.