Question

How do you replace the handles on your kitchen cabinets?

Answer 1

Replacing the handles on your kitchen cabinets is a relatively straightforward process. Here's a step-by-step guide to help you through the process:

Tools and Materials Needed:

• New cabinet handles
• Screwdriver (usually Phillips or flat-head, depending on the screws used)
• Measuring tape (optional)
• Pencil (optional)

Step 1: Measure and Purchase New Handles (if needed) Before starting, measure the distance between the screw holes on your existing cabinet handles. This measurement will help you ensure that the new handles you purchase will fit perfectly in the existing holes. If you're changing to handles with a different hole spacing, make sure to choose ones that match your new measurements.

Step 2: Remove the Old Handles

1. Open the cabinet doors and locate the screws securing the handles to the cabinet door or drawer front.
2. Use a screwdriver (usually Phillips or flat-head) to remove the screws from the backside of the cabinet door or drawer front. You may need to hold the handle in place with your other hand while removing the screws.
3. Once all screws are removed, gently pull the old handle away from the cabinet door or drawer front.

Step 3: Positioning the New Handles

1. Hold the new handle up against the cabinet door or drawer front in the desired position. Make sure it is straight and aligned as you want it.
2. If you are using handles with a different hole spacing, use a measuring tape to mark the correct distance between the holes on the cabinet door or drawer front. Alternatively, you can place the new handle against the old one and mark the hole positions with a pencil.

Step 4: Attach the New Handles

1. Insert the screws through the holes on the cabinet door or drawer front from the inside.
2. From the outside, align the new handle with the holes, making sure it is straight and properly positioned.
3. Tighten the screws from the inside using a screwdriver. Be careful not to overtighten, as it may damage the handle or the cabinet door.

Step 5: Repeat for All Cabinets Go through the same process for all the cabinets and drawers in your kitchen, replacing each handle one at a time.

Step 6: Double Check and Adjust After installing all the new handles, double-check that they are straight and aligned correctly. If any handles are misaligned or feel loose, you can adjust their position and tighten the screws as needed.

That's it! With these steps, you can easily replace the handles on your kitchen cabinets, giving your kitchen a fresh and updated look. Remember to take your time and be gentle with the installation to avoid any damage to your cabinets or new handles.