No, you should not connect two wires without a junction or proper electrical connection method. It is essential to follow electrical safety guidelines and electrical codes to prevent hazards like electrical fires and shocks.
To connect the electrical wire already connected to the fuse box to a shielded AC90 cable running to your kitchen island, you need to use an appropriate electrical junction box or enclosure. Here's the proper procedure:
Install a Junction Box: Locate an appropriate location to install a junction box or electrical enclosure near the point where the existing wire is connected to the fuse box. Make sure it is easily accessible and meets the requirements of local electrical codes.
Prepare the Wires: Strip the outer sheathing of both the existing electrical wire and the shielded AC90 cable to expose the individual wires inside. Follow the manufacturer's instructions for stripping the cables.
Connect the Wires: Inside the junction box, you will find terminal screws or wire connectors. Connect the corresponding wires from the existing electrical wire and the shielded AC90 cable. For example, connect the black (hot) wires together, the white (neutral) wires together, and the green or bare (ground) wires together. If your region uses different color codes, follow the standard color-coding for electrical wires.
Secure the Connections: Ensure that all wire connections are tight, secure, and properly insulated. You may use wire nuts or other approved connectors to achieve this.
Close the Junction Box: After making the connections, close the junction box or electrical enclosure and secure it with screws to keep the wires protected.
Test the Connections: Before using the electrical circuit, it's crucial to test the connections for continuity and proper functionality. You can use a multimeter or seek assistance from a qualified electrician to perform this step.
Always prioritize safety and consult with a licensed electrician if you have any doubts or concerns about electrical work. They can ensure that the connections are made correctly and in compliance with local electrical codes, keeping your home safe and reducing the risk of electrical accidents.