Question

My dishwasher runs but the water does not make it inside. I have a clip that two brown wires went to that clipped to a round blue device where the water comes in. What should I do?

Answer 1

If your dishwasher is running but the water is not making it inside, there could be a problem with the water inlet valve or the connection to it. The round blue device you mentioned is likely the water inlet valve. Here are some steps you can take to troubleshoot and potentially fix the issue:

1. Check the water supply: Make sure that the water supply to the dishwasher is turned on and that there are no clogs or restrictions in the water line.

2. Inspect the wires and connections: Since you mentioned two brown wires connected to the round blue device, it's possible that the connection has come loose or is damaged. Check the wires for any signs of damage or disconnection. If you find any issues, securely reconnect or repair the wires as needed.

3. Test the water inlet valve: The water inlet valve is responsible for letting water into the dishwasher. It could be faulty and not opening properly. To test the valve, you may need a multimeter to measure its continuity or electrical resistance. If the valve fails the test, it should be replaced.

4. Clean the water inlet valve: Sometimes, the water inlet valve can get clogged with debris, affecting its function. If you don't find any electrical issues with the valve, consider cleaning it. Before doing this, make sure to turn off the power to the dishwasher and shut off the water supply.

5. Check the float switch: The float switch is a safety device that detects the water level inside the dishwasher. If it's stuck in the "up" position, it can prevent water from entering the dishwasher. Ensure the float switch moves freely and is not obstructed.

6. Seek professional help: If you are unsure about dealing with electrical components or troubleshooting, it's best to call a professional dishwasher technician to diagnose and fix the issue safely.

Remember, safety is essential when dealing with electrical appliances, so always disconnect the power supply before attempting any repairs. If you are not confident in handling the repairs yourself, it's better to seek professional help to avoid any potential hazards and ensure a proper fix.