If you have a skinny strip at the end of a room that needs to be fixed up with vinyl flooring, here's a step-by-step guide to help you:
Measure the space: Start by measuring the width and length of the skinny strip to determine the amount of vinyl flooring you'll need. Make sure to add a few extra inches to your measurements for any mistakes or adjustments.
Gather materials: Purchase the required materials, including vinyl flooring planks or sheets, adhesive, a utility knife, a straight edge or ruler, a measuring tape, a notched trowel, a roller, and a pry bar (if needed).
Prepare the subfloor: Ensure that the subfloor is clean, dry, and free from any debris. Remove any existing flooring, such as carpet or old vinyl, using a pry bar or scraper.
Cut the vinyl flooring: Use your measurements to cut the vinyl flooring to the appropriate size. If you're using vinyl planks, you may need to cut them lengthwise to fit the skinny strip. Use a straight edge and a utility knife to make precise cuts.
Apply adhesive: Apply the appropriate adhesive to the subfloor using a notched trowel, following the manufacturer's instructions. Be sure to apply the adhesive only within the area where the vinyl strip will be placed.
Install the vinyl flooring: Carefully lay the cut vinyl strip onto the adhesive, aligning it with the rest of the flooring in the room. Press down firmly to ensure proper adhesion. If you're using vinyl planks, connect them together according to the manufacturer's instructions.
Roll the flooring: Use a roller to firmly roll over the entire vinyl strip. This will help ensure good adhesion and remove any air bubbles or wrinkles.
Trim excess vinyl: If there is any excess vinyl sticking out beyond the strip, use a straight edge and utility knife to trim it off. Make clean, straight cuts for a professional finish.
Allow for curing time: Follow the manufacturer's instructions regarding curing time for the adhesive. Avoid walking on the newly installed vinyl strip until it has fully cured.
By following these steps, you should be able to fix up a skinny strip at the end of a room using vinyl flooring. Remember to always refer to the specific instructions provided by the manufacturer of the vinyl flooring and adhesive you're using for the best results.