Removing grout sealer from tiles can be a bit challenging, but here's a general process you can follow:
Prepare the area: Make sure you have good ventilation in the room and protect surrounding surfaces that you don't want to be exposed to the cleaning agents or potentially damaged.
Choose a suitable sealer remover: There are various commercial grout sealer removers available in the market. Look for a product specifically designed for your type of tiles and grout. Read and follow the instructions provided by the manufacturer.
Apply the sealer remover: Apply the sealer remover to the affected tiles according to the instructions. Use a brush, sponge, or a cloth to spread the remover evenly over the grout lines and any areas with sealer. Allow the remover to penetrate the sealer for the recommended duration.
Scrub and agitate: After the recommended dwell time, scrub the grout lines and tiles with a scrub brush or a non-abrasive pad. This helps to loosen and remove the sealer. Pay attention to any stubborn areas and repeat the process if necessary.
Wipe and rinse: Use a clean cloth or sponge to wipe away the sealer remover and any residue from the tiles and grout. Rinse the area thoroughly with clean water to remove any remaining traces of the sealer remover.
Dry and inspect: Allow the tiles and grout to dry completely. Once dry, inspect the area to ensure that the grout sealer has been effectively removed. If there are still traces of sealer, you may need to repeat the process or consider seeking professional assistance.
It's essential to note that the specific products and techniques for removing grout sealer can vary depending on the type of tiles and grout you have. Always refer to the instructions provided by the manufacturer of the sealer remover and test the product in a small, inconspicuous area before applying it to the entire surface to avoid any potential damage to your tiles.