Moving a Kenmore refrigerator requires proper preparation and caution to ensure its safety and prevent any damage. Here's a step-by-step guide to help you move your Kenmore refrigerator:
Empty the refrigerator: Start by removing all the contents from the refrigerator and freezer compartments. Discard perishable items or transfer them to a cooler to keep them fresh during the move.
Unplug the refrigerator: Disconnect the power supply by unplugging the refrigerator from the electrical outlet. It's important to ensure that the refrigerator is completely powered off before proceeding.
Remove food and shelves: Take out any removable shelves, drawers, and other accessories from the interior of the refrigerator. Secure them separately to prevent damage during transit.
Defrost the freezer (if needed): If your Kenmore refrigerator has a manual defrost feature and there is a significant amount of frost build-up in the freezer, it's advisable to defrost it in advance. Turn off the refrigerator and allow the frost to melt naturally. Place towels or a container to catch the water and clean up any excess moisture.
Secure loose parts: Use tape or secure the refrigerator doors with a rope or bungee cord to prevent them from swinging open during transportation. This helps protect the doors and prevents them from getting damaged or causing accidents.
Protect the refrigerator: Wrap the entire refrigerator with moving blankets or bubble wrap to provide cushioning and protect the surfaces from scratches or dents. Secure the protective covering with tape or straps to keep it in place.
Use a dolly or hand truck: If possible, use a dolly or hand truck to move the refrigerator. Tilt the refrigerator slightly backward and carefully slide the dolly underneath it. Secure the refrigerator to the dolly using straps or bungee cords.
Move with caution: Slowly and carefully maneuver the dolly, keeping the refrigerator in an upright position as much as possible. Avoid any sudden movements or rough handling that could cause damage to the appliance.
Load into the moving vehicle: When loading the refrigerator into a truck or other moving vehicle, ensure that it is placed securely and cannot shift or tip over during transportation. Use straps or ropes to secure it in place.
Transport the refrigerator: Drive carefully, avoiding bumpy roads and sharp turns to minimize the risk of damage. If possible, keep the refrigerator upright throughout the journey to prevent any potential issues.
Unload and install: Upon reaching the destination, carefully unload the refrigerator from the vehicle and place it in its new location. Allow the refrigerator to sit upright for a few hours before plugging it in to allow the refrigerant to settle.
Remember, if you are unsure or uncomfortable moving the refrigerator yourself, it's best to seek assistance from professional movers or appliance technicians to ensure a safe and secure relocation.