To change the nozzle on a power washer, follow these general steps:
- Ensure the power washer is turned off and disconnected from the power source.
- Locate the nozzle attachment on the end of the spray wand. Nozzles are typically color-coded and are either threaded or quick-connect style.
- If you have a threaded nozzle: a. Hold the spray wand with one hand and use your other hand to grip the nozzle firmly. b. Rotate the nozzle counterclockwise to unscrew it from the spray wand.
- If you have a quick-connect nozzle: a. Pull back the collar on the quick-connect fitting at the end of the spray wand. b. While holding the collar back, firmly pull the nozzle straight out from the quick-connect socket.
- Once you have removed the old nozzle, choose the desired new nozzle for your intended task. Nozzles come in different spray patterns (0°, 15°, 25°, 40°, and sometimes soap nozzle) to control the intensity and width of the spray.
- If you have a threaded nozzle: a. Align the new nozzle with the threads on the spray wand. b. Begin screwing the nozzle clockwise onto the wand until it is tight. Be careful not to overtighten.
- If you have a quick-connect nozzle: a. Align the new nozzle with the quick-connect socket on the spray wand. b. Push the nozzle straight into the socket until it clicks into place. c. Give it a gentle tug to ensure it is securely connected.
- Once the new nozzle is attached, you can connect the power washer to a power source and start using it.
Remember to always refer to the manufacturer's instructions for your specific power washer model, as the steps may vary slightly.