Connecting a Miele dishwasher involves several steps to ensure proper installation. Before you start, make sure you have read the dishwasher's installation manual provided by Miele. Also, keep in mind that the specifics may vary based on the model, so always refer to the manual for your specific dishwasher. Here's a general guide to help you with the process:
Choose a location: Select a suitable location for the dishwasher near the sink. Ensure there is enough space and proper connections for water supply, drain, and electricity.
Prepare the site: Check that the floor is level and can support the dishwasher's weight when fully loaded with dishes and water.
Water supply: You will need a water supply line that connects from the dishwasher to the water source under the sink. Use a 3/8" water supply line to ensure adequate water flow. Make sure to install a shut-off valve for easy maintenance.
Drain connection: The dishwasher's drain hose must be connected to a suitable drain point under the sink or a dedicated dishwasher drain. It should have a high loop to prevent wastewater from flowing back into the dishwasher.
Electrical connection: Dishwashers require a 120V electrical connection. Ensure you have the appropriate electrical outlet installed and accessible for the dishwasher.
Ventilation: Some Miele dishwashers may require ventilation to improve drying performance. Follow the manual's instructions for venting if applicable.
Adjust the dishwasher legs: Adjust the dishwasher's leveling legs to make sure it sits evenly on the floor.
Connect the water supply: Use a 90-degree elbow to connect the water supply line to the dishwasher's water inlet valve. Hand-tighten the connections, but be careful not to overtighten.
Connect the drain hose: Attach the dishwasher's drain hose to the drain point under the sink or the dedicated dishwasher drain. Use hose clamps to secure the connection.
Connect the electrical supply: Plug the dishwasher's power cord into the appropriate electrical outlet. If it doesn't have a power cord, you may need to hardwire it to the electrical supply following local electrical codes.
Test for leaks: Turn on the water supply and check for any leaks at the water inlet valve and drain hose connections. Also, listen for any unusual sounds during the initial fill cycle.
Run a test cycle: Once the dishwasher is connected and you have checked for leaks, run a test cycle to ensure everything is functioning correctly.
Always follow the manufacturer's guidelines and the local building codes when installing a dishwasher. If you are unsure about any aspect of the installation, it's best to consult a professional plumber or appliance installer to ensure a safe and proper connection.