To set the rinse aid on an LG dishwasher, you can follow these general steps:
- Open the dishwasher door.
- Locate the rinse aid dispenser. It is usually situated on the inside of the dishwasher door, near the detergent dispenser.
- Remove the rinse aid cap or cover from the dispenser. This may involve twisting, pulling, or lifting it, depending on the specific model.
- Check the rinse aid level in the dispenser. If it is empty or low, it's a good idea to refill it.
- Pour rinse aid into the dispenser. Use a rinse aid specifically designed for dishwashers. Be careful not to overfill the dispenser, as it usually has a maximum fill line.
- Clean up any spills or drips around the dispenser area to prevent them from affecting the dishwasher's performance.
- Replace the rinse aid cap or cover securely back onto the dispenser.
- Close the dishwasher door, and make sure it latches properly.
- Set the rinse aid dosage level if your LG dishwasher has this feature. Some models allow you to adjust the amount of rinse aid dispensed based on your preference or water hardness. Refer to your dishwasher's user manual for specific instructions on adjusting the dosage level, if applicable.
- Start a dishwasher cycle as usual.
It's worth noting that the exact steps and terminology might vary slightly depending on the specific model of your LG dishwasher. For detailed instructions tailored to your appliance, I recommend consulting the user manual provided with your dishwasher.