On LG dishwashers, the error code "NE" stands for "Not Draining Error." This error code indicates that the dishwasher is not draining water properly after a wash cycle, which can be caused by various issues within the dishwasher's drainage system. When the dishwasher fails to drain properly, it can lead to standing water at the bottom of the tub and potential water leakage.
Here are some common reasons for the "NE" error code and possible troubleshooting steps:
Clogged Drain Filter: The dishwasher's drain filter may be clogged with debris, food particles, or other foreign objects. Clean the drain filter following the manufacturer's instructions.
Blocked Drain Hose: Check the drain hose for any obstructions or kinks that might be preventing proper water flow. Straighten or clean the hose as necessary.
Improper Installation of Drain Hose: Ensure that the drain hose is installed correctly and according to the manufacturer's guidelines. An improperly installed drain hose might lead to drainage problems.
Faulty Drain Pump: The dishwasher's drain pump may be malfunctioning, preventing it from effectively removing water. If the pump is faulty, it may need to be replaced.
Issue with the Drain Solenoid or Motor: Problems with the drain solenoid or motor can also cause drainage issues. A technician may need to diagnose and repair or replace these components.
If you encounter the "NE" error code on your LG dishwasher, try the following steps:
Cancel the current wash cycle and turn off the dishwasher.
Check for any visible blockages in the drain filter and drain hose.
Clean the drain filter and ensure it is properly seated back in its position.
Verify that the drain hose is correctly installed and free of obstructions.
Restart the dishwasher to see if the error code clears.
If the "NE" error persists or if you are unable to identify and resolve the issue on your own, it's best to contact LG customer support or a qualified service technician to diagnose and fix the problem.