To cancel the control lock on a Whirlpool dishwasher, follow these steps:
Locate the Control Lock button: The Control Lock feature is usually activated by pressing and holding a specific button on the dishwasher's control panel. Look for a button with a "Control Lock" label or an icon that resembles a padlock. On some models, this button may be labeled "Control Lock/Unlock" or "Lock."
Press and hold the Control Lock button: To cancel the control lock, press and hold the Control Lock button for approximately 3 to 5 seconds. You should see the control lock indicator light turn off or hear a beep, indicating that the control lock has been deactivated.
Test the dishwasher: After canceling the control lock, check if the dishwasher's control panel responds to your input. You should be able to select different wash cycles and options as usual.
If the above steps do not work, here are some additional troubleshooting tips:
Check the owner's manual: Refer to the dishwasher's user manual for specific instructions on how to cancel the control lock. Different models might have slightly different procedures.
Power cycle the dishwasher: Sometimes, power cycling the dishwasher can reset the control lock. Turn off the dishwasher by unplugging it from the power outlet or flipping the circuit breaker that supplies power to the dishwasher. Wait for a few minutes and then restore power. Try canceling the control lock again as described above.
Contact customer support: If you've tried all the steps and the control lock still won't cancel, it's possible that there might be a technical issue with the dishwasher's control panel. In such cases, it's best to contact Whirlpool customer support or a qualified appliance technician for further assistance and possible repairs.
Remember that the process to cancel the control lock may vary slightly depending on the specific model of your Whirlpool dishwasher, so consulting the user manual is always a good idea for accurate instructions.