Connecting a portable dishwasher to existing water and drain lines typically involves the following steps:
Position the Dishwasher: Place the portable dishwasher near the sink or the area where you plan to connect it to the existing water and drain lines. Make sure it is within reach of an electrical outlet.
Prepare the Water Supply Line: Locate the hot water supply under your sink. You'll need to connect the dishwasher to this water source. Start by shutting off the water supply valve under the sink to prevent any leaks. Next, disconnect the faucet or the hot water supply line from the shut-off valve. Attach a dishwasher connector kit (usually included with the dishwasher or available at hardware stores) to the shut-off valve. Connect the other end of the connector kit to the water inlet on the dishwasher.
Connect the Drain Line: Locate the sink drain pipe or the garbage disposal unit under your sink. You'll need to connect the dishwasher drain hose to this drain point. If there is a knockout plug inside the garbage disposal inlet, remove it using pliers or a screwdriver. Attach the dishwasher drain hose to the sink drain pipe or garbage disposal inlet. Ensure that the hose is secured tightly using hose clamps or zip ties to prevent leaks.
Secure the Hose: Ensure that the water supply and drain hoses are properly secured and positioned to prevent kinks, bends, or damage during operation. Use clips or hooks to secure the hoses to the back of the dishwasher or the adjacent wall.
Test the Connections: Once the water and drain lines are connected, double-check all connections for tightness and proper alignment. Open the water supply valve under the sink and check for any leaks. Run a test cycle on the dishwasher to verify that water is flowing in and draining properly. Monitor for any leaks or issues during the test cycle.
Note: It's essential to follow the manufacturer's instructions provided with your specific portable dishwasher model, as the installation process may vary slightly. Additionally, consult local plumbing codes and regulations to ensure compliance and safety.
If you are uncertain about any step or encounter difficulties during the installation process, it's recommended to consult a professional plumber for assistance.