To correctly measure for granite countertops in your kitchen and determine the square footage needed, follow these step-by-step instructions:
Gather the necessary tools: You will need a measuring tape, paper, pencil, and a calculator.
Clear the countertops: Remove any items, appliances, or clutter from the existing countertops to ensure accurate measurements.
Start measuring the length: Begin at one end of the countertop and use the measuring tape to measure the length in inches. Write down the measurement.
Measure the width: Move along the countertop and measure the width in inches. Write down the measurement.
Determine the linear footage: Add the length and width measurements together to obtain the linear footage of the countertop. For example, if the length is 72 inches and the width is 25 inches, the linear footage would be 97 inches.
Convert linear footage to square footage: Divide the linear footage by 12 to convert it to linear feet. In the previous example, 97 inches divided by 12 equals 8.08 linear feet.
Measure additional countertops: Repeat steps 3 to 6 for each additional countertop in your kitchen, if applicable.
Calculate the square footage: Multiply the linear feet obtained from step 6 by the average depth of your countertops. The standard depth is typically 25 inches, but it may vary depending on the specific countertop design. If the average depth is 25 inches, multiply it by the linear feet. For instance, if the linear footage is 8.08 and the average depth is 25 inches, the square footage would be 8.08 x (25/12) = 16.83 square feet.
Add up the square footage: If you have multiple countertops, sum up the square footage calculated in step 8 for each countertop to obtain the total square footage required for the granite countertops in your kitchen.
Remember, it's always recommended to consult with a professional or the granite countertop supplier to ensure accurate measurements and to account for any special requirements or variations that may apply to your specific kitchen layout.