Reversing the door on a Whirlpool Cabrio dryer is a fairly straightforward process, but it requires some tools and attention to detail. Before you begin, make sure to consult the dryer's user manual for specific instructions and diagrams that may be specific to your model. Here is a general guide on how to reverse the door on a Whirlpool Cabrio dryer:
Note: Make sure to disconnect the dryer from the power source before attempting any repairs or adjustments.
Gather the Tools: You will need a Phillips-head screwdriver, a 5/16-inch nut driver or socket wrench, and a putty knife.
Remove the Door: Open the dryer door and remove the screws on the opposite side of the door hinge (where you want to move the door). Place the screws in a safe place as you'll need them later. Carefully lift the door off the hinges and set it aside.
Remove the Hinge Screws: Using the putty knife, carefully pry open the plastic hinge covers on the dryer's front panel to expose the screws. Unscrew and remove the hinges from the dryer's front panel.
Move the Door Catch: On the opposite side of the door opening, you'll see the door catch (a plastic or metal latch). Remove it from its current position by unscrewing it and then attach it to the opposite side.
Move the Hinge Covers: Take the plastic hinge covers from the side where the door originally hinged and place them on the opposite side to cover the screw holes.
Reattach the Hinges: Install the hinges on the opposite side of the dryer's front panel using the screws you removed earlier. Make sure they are securely fastened.
Reattach the Door: Carefully place the dryer door back onto the hinges on the opposite side and align it properly. Insert the screws into the screw holes on the door and tighten them to secure the door in place.
Check the Alignment: Make sure the door is aligned properly and closes securely. If necessary, make minor adjustments to ensure a proper fit.
Test the Door: Open and close the door a few times to ensure it operates smoothly and latches securely.
Replace the Hinge Covers: Snap the plastic hinge covers back into place to cover the screw heads.
Once you've completed these steps, your Whirlpool Cabrio dryer should have its door successfully reversed. If you encounter any difficulties during the process or are unsure about any step, refer to the dryer's user manual or consider seeking assistance from a professional appliance technician.